My SSR GT-2 wheels come with center caps that were in horrible condition. I wasn’t a big fan of the design so I left them off. I prefer a flat cap. I tried a few different caps and none of them fit. SSRs have a unique size that uses an o-ring to lock the cap in place.
So instead of trying yet another set of center caps that probably won’t fit I decided to try and refresh my GT-2 center caps.
The steps are the same as any other paint project: clean, sand, sand, sand, primer and paint.
Sand (80 Grit).
Sand (120 Grit).
Sand (320 Grit).
Paint (Black base coat).
Paint (Colorshift top coat.
Allow at least 24 hrs for the paint to dry.